EDLT & Space Logic Commissioning Software

Discussion in 'C-Bus Wired Hardware' started by Jason Toubji, Mar 27, 2024.

  1. Jason Toubji

    Jason Toubji

    Joined:
    Mar 27, 2024
    Messages:
    1
    Likes Received:
    0
    Location:
    Sydney
    Hey I'm new to Cbus, and trying to program an EDLT, (The EDLT is from 2021).
    The issue that I'm having is that I cannot load the properties and program.
    Not sure if this is the wrong way to program or if its because the EDLT is old and doesn't work with the new software, I've updated the firmware of the EDLT to 1.7.0
     
    Jason Toubji, Mar 27, 2024
    #1
  2. Jason Toubji

    Wonkey

    Joined:
    Aug 3, 2004
    Messages:
    395
    Likes Received:
    37
    Location:
    Adelaide
    You need to use C-Bus Toolkit the commissioning software is a new piece of software that only supports a few C-Bus products at the moment
     
    Wonkey, Mar 28, 2024
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Back Space key does not work in the CNI Port Box

  2. Dali Commissioning

  3. Dali commissioning

  4. Helvar DALI Commissioning Tool

  5. Time estimation for programming - commissioning

  6. C-Bus dimmer in ceiling space

  7. Spacelogic CBUS commissioning software and the new 5502CDGP230

  8. Should you start a new forum for the Schneider commissioning software?

Loading...