1 Usb for Pac/Piced/Toolkit connection ?

Discussion in 'C-Bus Toolkit and C-Gate Software' started by Orihama, Mar 29, 2007.

  1. Orihama

    Orihama

    Joined:
    Sep 10, 2006
    Messages:
    6
    Likes Received:
    0
    Hello,
    I was wondering if it is possible to use the Pac unit to connect to toolkit (for programming and tranfering) and also to connect to Piced (for programming and transfering) with one and same Usb cable ?

    If yes, Would I need to unplug re-plug each time I change from Toolkit to Piced ?
    Thanks,
    Marc.
     
    Orihama, Mar 29, 2007
    #1
  2. Orihama

    Darren Senior Member

    Joined:
    Jul 29, 2004
    Messages:
    2,361
    Likes Received:
    0
    Location:
    Adelaide, South Australia
    You can use the PAC with ToolKit, but once you do that, it is only available for use via C-Gate. This means that you could use it with PICED if you were transferring projects via C-Bus, but you will not be able to transfer projects to the PAC itself. You will need to close ToolKit and C-Gate and re-start PICED before you can transfer projects to the PAC itself.
     
    Darren, Apr 2, 2007
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. PAC Connection Issues

  2. PAC not recognised by USB

  3. USB on PAC

  4. PAC connection problem

  5. Live Connection -PAC to PC via RS232

  6. Having Problems connection to Wiser after updating Toolkit and PICED

  7. CNI connection issues - "connection already in use"

  8. Piced transfer to Colour C-Touch USB!

Loading...