3 year old known bug revisited !

Discussion in 'C-Bus Toolkit and C-Gate Software' started by Barshack, Sep 5, 2015.

  1. Barshack

    Barshack

    Joined:
    Dec 15, 2010
    Messages:
    22
    Likes Received:
    0
    Location:
    Ketchum, Idaho, USA
    I made the following post 3 years ago:

    http://www.cbusforums.com/forums/showthread.php?t=8476

    I was told that:
    This is nothing to worry about. This is just data that is not loaded from the project. When you edit an individual unit it loads all the data and then will display correctly. The DMX gateway uses a different mechanism from most other units to get the data from the units to display on the grid, a mechanism which we have not correctly handled. This has been reported as a bug (#24040) internally.

    Its very cumbersome to work with toolkit with Groups being shown as "unknown". Is there any fix? Its been OVER 3 years !!!

    Thanks
     
    Barshack, Sep 5, 2015
    #1
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Toolkit Bug: Network setup

  2. ServerX, any known exploits?

  3. Converting from C-Touch to PICED - any known issues?

  4. Add wireless to 6 year old C-Bus system

  5. How old is too old.

  6. old old .cb2 project

  7. Faulty eDLT buttons, 'known manufacturing fault'

Loading...