4 Key (Scenes)

Discussion in 'C-Bus Wired Hardware' started by Bradcoll, Jul 30, 2007.

  1. Bradcoll

    Bradcoll

    Joined:
    Jul 30, 2007
    Messages:
    14
    Likes Received:
    0
    Hi all
    want to use 4 key Saturn Input to control 5 channels Dimmer Output
    1 Key - All 5 channels Off.
    2 Key - All 5 channels ramp up to 100% over 4 secs. Timing 4 secs apart.
    3 Key - All 5 channels ramp down to 50% over 4 secs. TIming 4 secs apart.
    4 Key - All 5 channels ramp down to 15% over 4 secs. Timing 4 secs apart

    My understanding is that scenes will do this (No experience in creating scenes). This is for a theatre room. Basically 3 different mood scenes with an ALL OFF when leaving.

    Any Suggestions!:confused:
     
    Bradcoll, Jul 30, 2007
    #1
  2. Bradcoll

    brathnach

    Joined:
    May 4, 2007
    Messages:
    16
    Likes Received:
    0
    Hey Brad,

    Working on similar set-up myself. Just wondering - when you say 4 seconds between, do you mean 4 seconds between each channel? i.e. first channel on, 4 sec later - second channel on etc etc. Just want to be sure.


    rob
     
    brathnach, Aug 18, 2007
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Blue LEDs on IR key inputs

  2. Flashing RED LEDs when a key is pressed.

  3. Light toggle & fan run-on timer with 1 key?

  4. Hardware key: Key initialize failed (DRIVER NOT INSTALLED)

  5. Remote trigger scenes on key inputs

  6. Scenes without scenes

  7. Saturn key delay before next key press

  8. Toggling between 2 scenes with a single key on eDLT

Loading...