5104d750 failure

Discussion in 'C-Bus Wired Hardware' started by rfrawley, May 24, 2009.

  1. rfrawley

    rfrawley

    Joined:
    May 24, 2009
    Messages:
    1
    Likes Received:
    0
    Location:
    Sydney
    Guys,

    One of these dimmer units has failed in my home system after a recent blackout. Is it possible to get them repaired. Or would anyone out there have a working version they has surplus to requirements?

    Can this be swaped for a more recent version?
     
    rfrawley, May 24, 2009
    #1
  2. rfrawley

    Newman

    Joined:
    Aug 3, 2004
    Messages:
    2,203
    Likes Received:
    0
    Location:
    Adelaide, South Australia
    Failed units can be returned to Clipsal for repair. If it's under warranty costs incurred should be minimal, if anything. If it's not under warranty then you'll be charged either repair or replacement costs.

    The 5104D750 dimmer is a fairly old dimmer design, but they are generally very reliable, so if it's served your requirements thus far I'd be inclined to stick with it and get it repaired/replaced. There haven't been any design updates done to this dimmer for a long time, so a more recently manufactured unit may not be any different to the one you have now.
     
    Newman, May 25, 2009
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. SENPILL After Power Failure....

  2. Minder - Controller Communications Failure

  3. 06-019-1 Enable & Disable Status After A Power Failure

  4. SENPILL (Multisensor) Occupancy sensor enabled after power failure

  5. Firmware Download Failure

  6. relay failure

  7. Problem with 3 Dimmers (5104D750)

  8. 5104D750 and 5504RDP failed ?

Loading...