5753L Occupancy Sensor triggering randomly

Discussion in 'C-Bus Wired Hardware' started by Mike Costello, Oct 11, 2017.

  1. Mike Costello

    Mike Costello

    Joined:
    Dec 9, 2013
    Messages:
    47
    Likes Received:
    0
    Location:
    UK
    Hi,

    I've a job where there's 18 of these installed but there are 3 in the hallway controlling the same circuit and one of them or all of them are causing it to come on when no one is setting them off

    Does anyone have any ideas what can cause this or is it a case of swapping them out with some of the others in the house and seeing if that solves it and the problem moves to wherever I put these ones

    Thanks
    Mike
     
    Mike Costello, Oct 11, 2017
    #1
  2. Mike Costello

    DarylMc

    Joined:
    Mar 24, 2006
    Messages:
    1,315
    Likes Received:
    49
    Location:
    Cleveland, QLD, Australia
    CGate logs if it is running somewhere will tell you which unit turned on the lights provided you know the time it occurred.

    If you had a PC connected and Toolkit running you can also view this in the application log.
     
    DarylMc, Oct 11, 2017
    #2
  3. Mike Costello

    Charlie Crackle

    Joined:
    Aug 3, 2004
    Messages:
    815
    Likes Received:
    8
    Location:
    Melbourne
    it could be an open window or a heater duct that turns on.
    just needs to see moving heat
     
    Charlie Crackle, Oct 12, 2017
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Pir Sensor 5753l

  2. Network shutdowns randomly.....full version

  3. Problem in 5753L PIR C bus sensor

  4. Light level sensor triggering group 5753L

  5. 5753L 360 PIR Occupancy Sensor

  6. 5753L occupancy sensor

  7. 5753L Occupancy Sensor

  8. 5753L Occupancy Sensor

Loading...