5753l

Discussion in 'General Discussion' started by jason dockree, Sep 17, 2008.

  1. jason dockree

    jason dockree

    Joined:
    Sep 8, 2008
    Messages:
    10
    Likes Received:
    0
    hi all need your help again i have pir 5753L in all the bathrooms and cant get them to work as turn the lights on when you walk into the room toolkit has picked them up and it could be just me as not sure how to program them i clues would be good


    jason cheers
     
    jason dockree, Sep 17, 2008
    #1
  2. jason dockree

    ______.

    Joined:
    Feb 4, 2008
    Messages:
    91
    Likes Received:
    0
    Location:
    UK - London
    Treat a PIR just like you would a switch. Put the group address in under the Day time setting and tick the box under the Night time setting to use the same as Day.
    Select the option box next to the Day function to change the timeout settings and you should be on your way.

    Check that the light level adjustment is at the right setting. If you have it turned all the way to Dark then the sensor won't trigger until it's pitch black, thus when your testing in the day it won't work for you.

    Hope this points you in the right direction :)
     
    Last edited by a moderator: Sep 17, 2008
    ______., Sep 17, 2008
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Descriptions and graphics for 5753,5753L,5750WPL

  2. 5753L dectection range with different height ?

  3. Pir Sensor 5753l

  4. PIR 5753L Wiring

  5. Depth of a 5753L

  6. PIR 5753L and 5753PEIRL

  7. 5753L Availability

  8. Passive Infrared detectors (5753L) showing 'No Serial #'

Loading...