6 gang Wireless saturn

Discussion in 'C-Bus Wireless Hardware' started by JGrundy, Jul 27, 2006.

  1. JGrundy

    JGrundy

    Joined:
    Jul 27, 2006
    Messages:
    2
    Likes Received:
    0
    Hi guys,

    I'm currently having some issues with a 6 gang wireless saturn.

    The problem I'm having with it, is it's not responding to any physical input, i can't connect it to a home group I have successfully setup, and my other wireless devices dont seem to be communicating with it.

    For example, it constantly has the top 2 buttons flashing. The top right button gives 2 quick flashes every second. The top left gives 1 flash every 2 seconds.

    It does not repsond to any of the 'hold for 10 seconds' or other possible way to configure or reset it.

    I'm not sure if it's wired correctly, as I didn't wire up this network myself, but could it be a wiring issue causing this? Or a faulty unit? Or something else I'm missing completely?

    Any help asap would be very appreciated! Thankyou!
     
    JGrundy, Jul 27, 2006
    #1
  2. JGrundy

    JGrundy

    Joined:
    Jul 27, 2006
    Messages:
    2
    Likes Received:
    0
    Called CBUS support and turns out it is possibly due to using small neon test lights.
    The panel requires a minimum of a 25w load, and these lights are definitely no where near that. So I'll try some new lights first.

    ( Thanks to CBUS support and Ashleigh for the PM )

    - J Grundy
     
    JGrundy, Jul 28, 2006
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.