Action Selectors

Discussion in 'C-Bus Toolkit and C-Gate Software' started by johnny, Mar 10, 2007.

  1. johnny

    johnny

    Joined:
    Jan 26, 2007
    Messages:
    18
    Likes Received:
    0
    Location:
    'The Smart State'
    Me again... starting to get the hang of it all, a big thanks to Ashleigh and Phil for your help.

    One question still goes on, how is it if you can make more than one scene on a device, but you can only use one trigger group, how do you activate a specific scene?
     
    johnny, Mar 10, 2007
    #1
  2. johnny

    Duncan

    Joined:
    Jul 23, 2004
    Messages:
    925
    Likes Received:
    0
    Location:
    Salinas de Garci Mendoza, Bolivia
    A Scene is remotely triggered by an Action Selector.. Each Trigger Group can have 255 Action Selectors.

    Each Neo/Reflection/Saturn plate has a single Trigger Group configured and each Scene that the plate stores uses a particular Action Selector on that Trigger Group to remotely trigger it.
     
    Duncan, Mar 11, 2007
    #2
  3. johnny

    Phil.H

    Joined:
    Jul 29, 2004
    Messages:
    466
    Likes Received:
    0
    Location:
    Sydney
    Don't forget - Each Trigger Group can have 255 levels.
    The levels of a Trigger Group are called "Action Selectors"
    Think of an Action Selector as the "Trigger" which triggers a scene.
    Another way of looking at it is, a Trigger Group is a Group or collection of Triggers - (Action Selectors)... ;)
     
    Phil.H, Mar 11, 2007
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Dual Action Required

  2. CTouch-CA addresses and action selectors?

  3. DLT Action Selectors

  4. Triggering action selectors?

  5. Trigger Scenes using action selectors

  6. Trigger Groups and Action Selectors

Loading...