Application 1

Discussion in 'C-Bus Toolkit and C-Gate Software' started by janine, Aug 25, 2006.

  1. janine

    janine

    Joined:
    Jan 13, 2006
    Messages:
    17
    Likes Received:
    0
    Hi,

    In the new toolkit v1.4 there is no application 1 for use with the minder alarm panel...what do i do now? I am using a Generation 2 Minder panel with a C-Bus setup....now i need to add the alarm keypad to the touch panels. What application will i now use for this?

    It's quite urgent!
     
    janine, Aug 25, 2006
    #1
  2. janine

    Duncan

    Joined:
    Jul 23, 2004
    Messages:
    925
    Likes Received:
    0
    Location:
    Salinas de Garci Mendoza, Bolivia

    Hi,

    Do you mean you can't create an Application at Address 1?

    If so.. (and I'm not sure WHY you would do this).. Open up File -> Preferences -> Compatibility.. make sure both checkboxes are checked.. try again.
     
    Duncan, Aug 25, 2006
    #2
  3. janine

    janine

    Joined:
    Jan 13, 2006
    Messages:
    17
    Likes Received:
    0
    Hey

    Hi duncan,

    Did that and seems to work thanks :)

    The reason i need it is to display the zone status of each zone from the Minder panel (OEM-ed from Comfort) It sets/resets groups in application 1 whenever something happens on the Minder Panel. then i just display these states in the C-Touch panel :)

    It's worked for me before, unless there's an easier way that i don't know about?
     
    janine, Aug 25, 2006
    #3
  4. janine

    Duncan

    Joined:
    Jul 23, 2004
    Messages:
    925
    Likes Received:
    0
    Location:
    Salinas de Garci Mendoza, Bolivia

    Application 1 is designated as Free Use.. so I guess its fine.. I thought it was reserved when I read this thread for the first time :) Glad you're up and running.
     
    Duncan, Aug 25, 2006
    #4
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Article Discussion The Application Log

  2. Application log

  3. Updated documentation: Trigger Control Application

  4. 2 edit application buttons

  5. CGate cannot find application

  6. Modification to Date & Time Application

  7. Neo, Support of one application PLUS Trigger Control

  8. C-Bus Application numbers

Loading...