Are these suitable for the 1a dimmers ?

Discussion in 'C-Bus Wired Hardware' started by theboyg, Aug 1, 2013.

  1. theboyg

    theboyg

    Joined:
    Apr 3, 2005
    Messages:
    210
    Likes Received:
    9
    theboyg, Aug 1, 2013
    #1
  2. theboyg

    ashleigh Moderator

    Joined:
    Aug 4, 2004
    Messages:
    2,397
    Likes Received:
    26
    Location:
    Adelaide, South Australia
    No idea. Buy a couple and try them.

    Bear in mind these are 240V input, so you can replace those used with low voltage transformers. Being 240V input they may well be OK.

    Also bear in mind that 350 lm output is roughly the same as the old 35W halogen lamps, so if you have / had 50W halogens and put these in as a replacement, you'd find the light output to be noticeably lower.
     
    ashleigh, Aug 2, 2013
    #2
  3. theboyg

    zei20t

    Joined:
    Aug 18, 2010
    Messages:
    130
    Likes Received:
    1
    Location:
    Sydney, Australia
    I have something similar (they probably come from the same factory) and they work fine.

    the dimming works well except they do drop off very quickly.
     
    zei20t, Aug 2, 2013
    #3
  4. theboyg

    lennyb

    Joined:
    Feb 25, 2013
    Messages:
    41
    Likes Received:
    0
    Location:
    UK
    Boyg, are you in the UK? If so I'd be interested to know if you bought these lamps and what you think of them, once they arrive.
     
    Last edited by a moderator: Aug 17, 2013
    lennyb, Aug 17, 2013
    #4
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.