B&W Application Problems

I am having problems with a new B&W screen (With Logic) everthing works fine when using the lighting application, but if i use any other application nothing works. the screen is using 3.41.0 firmware(c-touch) and 5.1.00 firmware (C-BUS).
On this project we have all the dimmers and relays on the application 56 (lighting) and all sensors and switches mainly on application 50 (inputdev).
We have already configured the system, and came away from site with the screen because of this fault. My intension was to program the screen off site and then get it delivered by to site by a courier. The site is 5 hours away and i dont wont to have go back to reprogram the complete system because the screen wont work on any other applications.
If there is a solution to this can someone let me no.
Please Help

 

The problem you have is a Clipsal firmware issue (see thread)

http://www.cbusforums.com/forums/showthread.php?t=5051

No one knows when they will release a fix for this problem. You're best to go back to the old version of firmware/software to get the system work.

On a side ? why do you have your inputs and outputs on different applications?

 

The reason is with a large number of input devices and outputs, the documents we produce for the O&M manuals is automatically produced by software we wrote to extract the information directley out of toolkit. So the documents in the O&M always match the program.

 

This problem has been fixed in firmware V3.42 which was delivered with PICED V4.6

** Which is available for download NOW **