B&W CT Backlight

The new Piced seems to have some nice improvements, also on the firmware side.
I did notice though that one cannot get the backlight to switch off completely anymore. That despite the slider being taken right down to 0 mA.

This is not a problem, but I am wondering if it is as intended. If so, perhaps the minimum setting and indication should match the actual backlight output.

Cheers
Thomas

 

You are quite right. I had to switch off the lights and put my head and a C-Touch under a cardboard box to get it dark enough, but the backlight is on slightly, even at 0mA. I will get this fixed.

I spent several hours working with my head under a box one day while making changes to the firmware and my office mates didn't even notice !

 

was that because you were ar.. up

 

I assume it was because they were deep in concentration. Maybe they were asleep