BACnet to C-Bus Gateway

On C-bus Enabled website a saw this announcement:

"Clipsal Integrated Systems and Automated Logic are proud to announce the LGR 25/250/1000 ?family? of router/third party interface devices are now certified as C-Bus Enabled.
Automated Logic Corporation is a leading manufacturer of web enabled, open protocol BACnet, building automation systems located in Georgia, USA and selling into projects around the world.
The LGR 25/250/1000 product family enables C-Bus lighting commands, status and dimmer levels to be mapped to the BACnet protocol.
This BACnet interface allows C-Bus lighting to be completely integrated with the full range of systems and equipment within buildings."

Did any of you used this product?
There are some companies in UK distributing Automated Logic.
Where should I talk to?

 

Well,
although the relevant post of Macka was locked, since I am just trying to find a source for these Automated Logic interface devices I will ask again for your help.

As I wrote in http://www.cbusforums.com/forums/showthread.php?t=3256&highlight=modbus, the reason is that "In commercial projects where a BMS is installed, most of the times a secondary bus system has the control of the lighting system. If there is a need for full integration, EIB has a cheap device to communicate with BMS and gets the whole pie. "

I tried to contact to Automated Logic via their site's contact form. I send also an email to Celsius energy control, Red control Systems and T.F. Tull which appeared to be distributors in UK but I haven't get an answer yet.

Any contact detail would be appreciated.

PS: Although Modbus gateway works fine, a BACnet interface is useful too.

 

Just a few more sleeps

 

5000bacnet +1000

After 2 years although there is the 5000BACNET I understand that it isn't available to everybody.

Is this true or should I press harder the Greek SE office?

 

any guess about the price?

 

Schneider people say that they cant find 5000BACNET as order code sothey cant tell my anything about availability or price.

they also insist that the professional dimmer L5112D5LPR12, which NickD proposed to me at http://www.cbusforums.com/forums/showthread.php?t=5868 does not exist and I had to order L5112D5LPR6 although both products are shown on the C-Bus Product Overview Catalogue with Order Code 5805 page 48 (and Bacnet Gateway on page 67)

 

I can hopefully help out here
Can you send me the contact you are talking to in SE Greece

The BACnet gateway is a custom configured device and we need to ensure support is in place in your locality

The dimmer is a standard product you list a 12 channel 5 amp with 12 onboard RCD/MCB combo's
We also make a unit without the RCD's L5112D3LP which is cheaper

 

Snowy,
I send you a pm 2 weeks ago and still nothing from S.E.

 

Hi 2SC
Sorry for the perceived delay
It can be a little complicated getting information through to different markets
You should now be able to purchase the Pro+ dimmers you were looking for and i am still working on the supply requirements for the BACnet gateway

 

Hi,

We would also be interested in sourcing the C-Bus to BACnet gateway in the UK.

Is there a supplier for these?

Thanks

 

BACnet to C-Bus gateway 5000BACNET

Any one can advice the price of the BACnet to C-Bus gateway 5000BACNET