Bed side dimmable lights

Discussion in 'C-Bus Wired Hardware' started by Veryrainyday, Nov 13, 2015.

  1. Veryrainyday

    Veryrainyday

    Joined:
    Sep 27, 2015
    Messages:
    18
    Likes Received:
    0
    Location:
    Sydney
    I'm thinking about some bed side dimmable lights built into the wall - are there any particular considerations for organising this with C-Bus?
     
    Veryrainyday, Nov 13, 2015
    #1
  2. Veryrainyday

    Matthew

    Joined:
    Oct 26, 2007
    Messages:
    260
    Likes Received:
    1
    Location:
    Adelaide
    same as always

    Hi
    The same as any other light, if you are going to use LED, ensure they are dimmable by C-Bus leading edge type dimmers and test / try them out if you are unsure as sometimes single lighting loads do not have enough load for the dimmer circuit to function correctly.
     
    Matthew, Nov 13, 2015
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Load side protection

  2. cat 5 in bed of mortar -

  3. Controlling outputs other side of 5500NB

  4. Dimmable LEDs - 8ch CBus Dimmer - Lights flicker when off

  5. Extended MMI messages from the far side.

  6. Feedback from far side network to Wiser

  7. CBus dimmable LED lights with remote colour change

  8. MCB on Output side of Dimmer

Loading...