Buggette with Toolkit

Discussion in 'C-Bus Toolkit and C-Gate Software' started by MHeaton, Jul 23, 2011.

  1. MHeaton

    MHeaton

    Joined:
    Apr 22, 2008
    Messages:
    107
    Likes Received:
    2
    Location:
    London
    Hi there,
    In the latest toolkit for the unit screen for single zone thermostats. If you choose a plant type of Heat-pump Heating only and then untick the ventilation box (which remains enabled) save the form and re-open it your choice is not persisted.

    Regards
    Mark
     
    MHeaton, Jul 23, 2011
    #1
  2. MHeaton

    george

    Joined:
    Jul 26, 2004
    Messages:
    158
    Likes Received:
    1
    Location:
    Adelaide
    Thanks Mark.

    Defect #21731

    George
     
    george, Jul 25, 2011
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Minder PCI - Not compatible with Toolkit

  2. C-Touch software with C-Bus Toolkit compatibel

  3. C-touch with Toolkit

  4. A little bit of weirdness with Toolkit...

  5. Problem With COM ports in Toolkit 1.1.4

  6. SENPIRSS Saving Serial with New Toolkit

  7. How to Import old Toolkit cb2 project files into current Toolkit 3 software.

  8. eDLT problems in Toolkit 1.13.0 - Toolkit crashes

Loading...