C-bus led not illuminated on the control box but "unit" light is flashing

Discussion in 'General Discussion' started by Paul Balsarini, May 26, 2018.

  1. Paul Balsarini

    Paul Balsarini

    Joined:
    May 26, 2018
    Messages:
    1
    Likes Received:
    0
    My dimmer switches don't work and the switch led's are not illuminated. I can turn the lights on individually on the control panel
     
    Paul Balsarini, May 26, 2018
    #1
  2. Paul Balsarini

    Roosta

    Joined:
    Nov 22, 2011
    Messages:
    560
    Likes Received:
    1
    Location:
    Australia
    Hi Paul ,

    Welcome to the forum.

    Sounds to me like you are lacking CBUS power.

    Best to call in a sparky (electrician) familiar with CBUS to have a look and give you options..
     
    Roosta, May 26, 2018
    #2
  3. Paul Balsarini

    lcrowhurst

    Joined:
    Dec 2, 2004
    Messages:
    275
    Likes Received:
    98
    Location:
    Sydney, NSW, Australia
    upload_2018-5-27_10-42-22.png

    Is the Cbus light green on the units? As Roosta said sounds like either a Cbus power issue , may a short causes by a faulty unit or wiring issue
     
    lcrowhurst, May 27, 2018
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Back Space key does not work in the CNI Port Box

  2. Flashing CBUS Data light on Relay

  3. C-Bus Sim module in Minder not flashing

  4. Why the neo LED flashing

  5. How to avoid the multi sensor blue light but still have occ sens

  6. Color c-touch color can read but not send out c-bus messages

  7. 5104DTSI temp unit found but not reading

  8. C Bus Relay working but no power to unit

Loading...