C-Bus running at 100% CPU

Discussion in 'C-Bus Toolkit and C-Gate Software' started by benfjo, Aug 13, 2004.

  1. benfjo

    benfjo

    Joined:
    Aug 13, 2004
    Messages:
    24
    Likes Received:
    0
    Location:
    UK
    I've just installed the C-Bus software (v2.7.6) onto my laptop and it keeps on running at 100% CPU. The problem appears to be that I don't have a real serial points on the system, only USB. I do have an ISDN that shows as COM3, which is what I select under the coms setup.

    Is this a know problem, and is there a way around it. Can I start the software up in a 'no comms' mode?

    JB
     
    benfjo, Aug 13, 2004
    #1
  2. benfjo

    Duncan

    Joined:
    Jul 23, 2004
    Messages:
    925
    Likes Received:
    0
    Location:
    Salinas de Garci Mendoza, Bolivia
    Yes.

    No way around it. Sorry. :-(

    Fixed in the upcoming release of V3. :)
     
    Duncan, Aug 14, 2004
    #2
  3. benfjo

    Advantex

    Joined:
    Aug 9, 2004
    Messages:
    43
    Likes Received:
    0
    Location:
    Te Puke NZ
    would not installing the software for a USB to serial converter tell the lappy that a serial port existed (even if it was not communicating) - or have I picked this up wrong?
     
    Advantex, Aug 14, 2004
    #3
  4. benfjo

    Dave Byron

    Joined:
    Aug 3, 2004
    Messages:
    835
    Likes Received:
    0
    Location:
    Casurina
    110 % Cpu

    The problem is with CCS.exe and i have told clipsal but all u get is it will be fixed
    in version 3 which is already 12 months late
     
    Dave Byron, Aug 14, 2004
    #4
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. after 100 metres of cat5 pink.

  2. How to make scenes with more than 100 group adresses...

  3. Running C-Bus Toolkit on Vista

  4. Total Number of Units over 100

  5. reduce CPU Usage

  6. Converting Serial 5500PC to Ethernet CNI for under $100

  7. Control / enable output only if logic running & connected to c-bus

  8. Velux integra via KLF 100

Loading...