C-Bus wireless dimmers

Discussion in 'C-Bus Wireless Hardware' started by ChrisDeighton, Mar 5, 2008.

  1. ChrisDeighton

    ChrisDeighton

    Joined:
    Feb 23, 2008
    Messages:
    8
    Likes Received:
    0
    Hi all,

    Does anyone know if the Saturn wireless 2 channel dimmers (eg. E5886D1L2AA) can be used with a single load (thus leaving the second dimming channel disconnected), or must both channels be connected for the device to operate correctly?

    The user manuals state that the two channel relay modules require both loads connected, but there is no mention of this for the dimmers.

    Any advice gratefully received...!

    Regards,

    Chris.
     
    ChrisDeighton, Mar 5, 2008
    #1
  2. ChrisDeighton

    Newman

    Joined:
    Aug 3, 2004
    Messages:
    2,203
    Likes Received:
    0
    Location:
    Adelaide, South Australia
    Only the 2-Channel Relay unit has this constraint.

    The 2-Channel dimmers must have a load connected to Channel 1 but if Channel 2 is not connected then there's no consequences. Leading Edge and Trailing Edge dimmers are both the same in this regard.
     
    Newman, Mar 6, 2008
    #2
  3. ChrisDeighton

    ChrisDeighton

    Joined:
    Feb 23, 2008
    Messages:
    8
    Likes Received:
    0
    Thanks Newman, that's exactly what I needed to know!

    Regards,

    Chris.
     
    ChrisDeighton, Mar 6, 2008
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.