C-Bus Wireless Remote Control of Blinds

Hi,
Is it possible to program the up/down arrow keys on a c-bus wireless remote control?
I know how to program the 4 key buttons on the remote to virtual buttons on wireless adaptor to then control group addresses on a wired network.
Was hoping to use a wireless cbus remote to control motorised blinds, ie: use the up/down arrow keys for movement of blinds up and down to control scenes set in a wired DLT key input or saturn switch and the 4 key buttons on the remote to control stop / start of 4 seperate banks of blinds

Thanks

 

The up/down buttons are not programmable. They issue ramp up/down when pressed and end ramp commands when released on the last group selected.

 

Hi Ashley,
Long overdue reply sorry (dont get on here much) but thanks for the response. I suspected they wouldnt be programmable but was thinking how nice it would of been to use them up / down controls a bit like a volume button on a tv remote!
Nevermind, I ended up using 1 button control (ie; up/stop/down) on a nearby DLT which has been good.
Remotes go missing or flat anyway!

Regards
Matt