C-Gate Requirements

Discussion in 'C-Touch/HomeGate/SchedulePlus/PICED Software' started by MikeEco, Jul 25, 2011.

  1. MikeEco

    MikeEco

    Joined:
    Jun 23, 2008
    Messages:
    22
    Likes Received:
    0
    Location:
    Sydney
    Hi All,

    I have been asked by a client to provide remote access to their c-bus installed sites.

    There are 60 sites in total with 3-4 units on each site.

    We intend on installing a CNI on each site and use their existing LAN run Schd + in their head office.

    My question is what specifications should i be looking at for my PC, all i have been told so far is to use a blade server.

    My clients IT guys need specs asap! any help would be awesome.

    Cheers
    Mike
     
    MikeEco, Jul 25, 2011
    #1
  2. MikeEco

    daniel C-Busser Moderator

    Joined:
    Jul 26, 2004
    Messages:
    770
    Likes Received:
    21
    Location:
    Adelaide
    Hi Mike,

    You will need to consult Technical Support for the official response on this matter. I can't give you concrete specs.

    However, a few thoughts:

    1. Error Correcting RAM from a reputable brand. This is crucial.

    2. Lots of RAM. If you're running Windows XP, it'll use up to 4GB of RAM, and you can't go far wrong with that. Remember to go into Toolkit preferences and allocate more RAM to C-Gate than the default.

    3. Hard Drive space. Take potentially several gigabytes of log files into consideration.

    4. Clean ethernet. Avoid odd configurations or routers injecting funny messages. The more "standard" your network, the better.
     
    Last edited by a moderator: Jul 25, 2011
    daniel, Jul 25, 2011
    #2
  3. MikeEco

    MikeEco

    Joined:
    Jun 23, 2008
    Messages:
    22
    Likes Received:
    0
    Location:
    Sydney
    Cheers Daniel.

    Are there any processor requirements?
     
    MikeEco, Jul 26, 2011
    #3
  4. MikeEco

    NickD Moderator

    Joined:
    Nov 1, 2004
    Messages:
    1,427
    Likes Received:
    64
    Location:
    Adelaide
    Yes.. you definitely need a processor :)

    Seriously though, for advice on system specification such as this you really should contact Technical Support, rather than taking advice from an unofficial source such as this forum.

    Chances are the same people will ultimately end up answering your questions, but :

    a) they'll be able to spend more time on it because it comes through official channels, and
    b) you get an official recommendation, which is supported by the company (unlike anything that's said here)

    Nick
     
    NickD, Jul 26, 2011
    #4
  5. MikeEco

    MikeEco

    Joined:
    Jun 23, 2008
    Messages:
    22
    Likes Received:
    0
    Location:
    Sydney
    Cheers

    I am currently going through official channels, i find the forums much quicker!!!
     
    MikeEco, Jul 27, 2011
    #5
  6. MikeEco

    ashleigh Moderator

    Joined:
    Aug 4, 2004
    Messages:
    2,397
    Likes Received:
    26
    Location:
    Adelaide, South Australia
    Any modern processor will do.

    A BIG Caveat: If you use ECC RAM, you *must* *must* *must* use a Xeon processor. The new Intel Core i series of processors are very nice and very yummy AND THEY DO NOT SUPPORT ECC RAM. They are desktop processors, and Intel have a marketing distinction: Core i series = desktop = no ECC. Xeon = server / professional = ECC.

    You also need a motherboard chipset that supports ECC.

    Basically you are looking at a professional workstation (but check that its got ECC RAM, supports ECC in the chipset, and uses a Xeon).

    If anybody at all tells you that what I have written is wrong, smack them. They don't know. It took me about 6 or 7 hours of digging to eventually find this out.

    [I don't know about AMD processors. Don't ask "what about AMD", cos I can't answer.]

    --------

    Clarification: If you are looking at a machine spec, and it does not mention ECC, then it does not have it. If it mentions ECC and does not have a Xeon, they are telling lies.

    You will find systems from Dell, Lenovo, etc, that are OK and do all this. You can also build your own very successfully from parts. If you want details, I can tell you one a couple I've done that would be just fine (in fact would be way overkill).
     
    Last edited by a moderator: Jul 27, 2011
    ashleigh, Jul 27, 2011
    #6
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.