C-Touch Colour Universal Bracket

Discussion in 'General Discussion' started by Darren Bowler, Nov 9, 2005.

  1. Darren Bowler

    Darren Bowler

    Joined:
    Jan 11, 2005
    Messages:
    1
    Likes Received:
    0
    Is it possible to make a bracket to go onto the C-Touch Colour wall box so that it can fit a black and white touchscreen, this would then allow the client to change the touchscreen at anytime, providing they have the facitlity to pull in the power supply cable.
     
    Darren Bowler, Nov 9, 2005
    #1
  2. Darren Bowler

    PSC

    Joined:
    Aug 3, 2004
    Messages:
    626
    Likes Received:
    0
    Location:
    Brisbane, Australia
    Yeah, good luck :cool:
     
    PSC, Nov 9, 2005
    #2
  3. Darren Bowler

    Nobes

    Joined:
    Oct 7, 2004
    Messages:
    167
    Likes Received:
    1
    Location:
    Hobart
    We actually have some that Clipsal made for us when we couldn't get the Colour screens. Some haven't been used. They are a stainless (I think) Panel that goes on the out side of the plaster. It has 4 screw holes to screw into the Colour wall bracket. Then a cut out in the middle for the B&W screen and two screw holes.
    The plate looks like the 'B' style plates.

    I don't need them anymore If you want one, will see if i can get a photo a post it up.

    Chris.
     
    Nobes, Nov 9, 2005
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. IR basics & the Universal Remote Control

  2. Universal Remote Control

  3. 5038TX IR Codes for the MX-3000 Universal Remote

  4. Universal Dimmer - Lamp Types

  5. CBUS Universal Remote Control

  6. Can't get trailing edge mode on universal dimmer

  7. Universal Remote

  8. BELL 7W Dimmable LED using Universal Dimmer

Loading...