C-Touch in a Ethernet network

Discussion in 'C-Touch/HomeGate/SchedulePlus/PICED Software' started by Daniel RM, Jan 20, 2006.

  1. Daniel RM

    Daniel RM

    Joined:
    May 17, 2005
    Messages:
    18
    Likes Received:
    0
    Hi

    I have a little cuestion

    How can I see a C-Touch colour in an ethernet network??

    If I make a ping from ctouch colour to my computer I can send Packets to my computer, but If I ping from my computer to C-Touch I loss 100% of packets.Whats happenig.

    Could I install some new software into C-Touch moving it from a network? Or can you give me a web page where I can learn about this???

    Regards

    Daniel RM
     
    Daniel RM, Jan 20, 2006
    #1
  2. Daniel RM

    ashleigh Moderator

    Joined:
    Aug 4, 2004
    Messages:
    2,393
    Likes Received:
    25
    Location:
    Adelaide, South Australia
    Incoming pings are blocked in the firewall.

    The next update will change this so that Pings are allowed.

    It will also provide the facility to open up a restricted list of ports in the firewall for IP communication.

    Coming soon....
     
    ashleigh, Jan 21, 2006
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. RS232 to Ethernet adapters

  2. Ethernet access to Schedule Plus

  3. C-Touch in an Ethernet network

  4. PAC with ethernet possible?

  5. Problem with Ethernet PCI

  6. Ethernet Over Power

  7. Ethernet Network Interface 5500CN (SLC5500CN USA Spec.)

  8. Ethernet Switch for C-Bus network

Loading...