C-Touch not responding

Discussion in 'C-Touch/HomeGate/SchedulePlus/PICED Software' started by emokoena, May 13, 2014.

  1. emokoena

    emokoena

    Joined:
    May 13, 2014
    Messages:
    1
    Likes Received:
    0
    Location:
    Krugersdorp, South Africa
    I have a C-Touch screen, I can calibrate, set time and change screens but can't switch on/off the lights & plugs.

    Current logic resides on this touch screen, when I press a particular light button it illuminates signalling it has been touched and then switches back with 2 seconds to non-switched state.

    What could be wrong?
     
    emokoena, May 13, 2014
    #1
  2. emokoena

    Robbo_VIC

    Joined:
    Jan 24, 2011
    Messages:
    143
    Likes Received:
    0
    Location:
    Melbourne, VIC
    What happens when you use regular keyswitches around the house? Do the lights come on properly? Do the buttons on the C-Touch indication match what the circuit is actually on?
     
    Robbo_VIC, May 13, 2014
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. C-Touch not responding to touch input

  2. B&W C-Touch not responding.....

  3. Dimmer not responding

  4. Unit Not Responding

  5. Monochrome Touch Screen Not Responding..

  6. Dimmer Channels not responding to software & key input units

  7. dlt's-dimmers-din rails not responding to toolkit

  8. Problem with Cbus not responding immediately

Loading...