Clipsal C-Bus Occupancy sensors controlling Powerlink breakers

Discussion in 'General Discussion' started by luisangel.murillo, Apr 16, 2012.

  1. luisangel.murillo

    luisangel.murillo

    Joined:
    Apr 16, 2012
    Messages:
    1
    Likes Received:
    0
    Location:
    Costa Rica
    I have a powerlink control panel, with BACnet protocol integrated to a BAS Continuum system.

    Occupancy sensors Clipsal C-bus are used to activate the zones-breakers of Powerlink, but is has not worked.

    I am trying communication between clipsal and powerlink with a PC interface, but it seems not working, I don't know why.
     
    luisangel.murillo, Apr 16, 2012
    #1
  2. luisangel.murillo

    ashleigh Moderator

    Joined:
    Aug 4, 2004
    Messages:
    2,397
    Likes Received:
    26
    Location:
    Adelaide, South Australia
    You need to contact Square D / Schneider technical support.
     
    ashleigh, Apr 16, 2012
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Occupancy sensors

  2. Occupancy sensors and A/C vents

  3. Occupancy Sensors

  4. Designing with Clipsal C-Bus Occupancy Sensors

  5. Occupancy sensors

  6. Powerlink NF3000GC and Clipsal

  7. Square D Powerlink NF3000G3 & Clipsal PCI

  8. Powerlink Breakers and Saturn Keypads

Loading...