Clock on DTL units

Whats required to get a clock to show on DTL units apart from ticking the box on each unit.
The firmware updates for the ctouch says its tx a clock so is that the clock source ?

What controls the "nightlight" ???



dave

 

DLT Clock & Nightlight

Hi Dave,

The easiest way to set the clock on a DLT is to Extra Long Press (hold down for ten seconds) the Page Button. This will put the DLT into Time Set mode and you can select and save the time (and broadcast it to the network).

The other option is to ensure the 'Show Clock' box is ticked, then broadcast the time to the network using a CTouch.

You can select a nightlight on the Page Button, User Buttons or both. The Nightlight will turn on at the 'Fixed Level' after no buttons have been pressed for the 'Activity Duration'.
If 'Override Indicator Status' is checked the nightlight will always turn on after this time. If it is unchecked then the nightlight will only turn on if no LEDs are already on.

Cheers,
Mark.

 

To get the clock to show on the DLT press the Next Key for about 10 seconds and you will see a page that allows you to set the time, after doing that the clock will be shown instead of the word NEXT

 

clock

Right got the clock on switch set to 5am and this then changed clock in ctouch screen, now i what to make the ctouch the master clock source....

Changed ctouch back to correct time and switch changes to correct time so now how do i display time in switch but stop the kids changing time in a switch and setting wrong time on everthing else ??

dave

 

Ha! Don't tell/show them the bit about holding the 5th key down for 10 seconds.