CNI plus Wireless Adapter

Discussion in 'C-Bus Wired Hardware' started by jamiepwood, Apr 25, 2012.

  1. jamiepwood

    jamiepwood

    Joined:
    Apr 17, 2012
    Messages:
    6
    Likes Received:
    0
    Location:
    Amersham
    Is there any reason a CNI that is set up on the network should not work when the ethernet is plugged into a wireless adapter ? The CNI is fine connected via ethernet and the adapter is fine connected via WiFi. But CNI doesn't seem happy with WiFi.
     
    jamiepwood, Apr 25, 2012
    #1
  2. jamiepwood

    DarylMc

    Joined:
    Mar 24, 2006
    Messages:
    1,315
    Likes Received:
    49
    Location:
    Cleveland, QLD, Australia
    Which wireless access point are you using?
    I think you will need to use "AP client mode" on the wireless access point connected to the CNI.
     
    DarylMc, Apr 25, 2012
    #2
  3. jamiepwood

    jamiepwood

    Joined:
    Apr 17, 2012
    Messages:
    6
    Likes Received:
    0
    Location:
    Amersham
    that might be the problem. Its a NetGear Adapter and it has no AP mode
     
    jamiepwood, Apr 25, 2012
    #3
  4. jamiepwood

    TimB C-Bus Systems Engineer

    Joined:
    Dec 23, 2004
    Messages:
    21
    Likes Received:
    0
    Location:
    Adelaide, South Australia
    Hi Jamie,

    There are no known issues with CNIs and WiFi networks, but it's not a common scenario. Can you provide more information about your setup - which CNI are you using (5500CN or Wiser/5100CN2) and which NetGear adapter? And what kind of problems are you experiencing?
     
    TimB, Apr 26, 2012
    #4
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.