Compatible alarm panels? Newbie from Malaysia!

Dear Robbo,

Thank you for your response. I am less doubtful now.

However, will I be able to do the followings on Wiser iPhone app?

-Arm or disarm the alarm
-Monitor zone statuses

I know I can to them on the Paradox iPhone app but I won't have the Internet Module IP100 when I already have PRT3.

One more thing though, I intend to use a Serial>Ethernet Adapter to interface PRT3 to C-Bus. How do I make C-Bus recognize the PRT3? I believe the C-Bus PC interface is rather expensive.

Thank you!

 

...and can it react to C-Bus group changes ?

K

 

I am currently in the middle of testing the viewing of the Zone Statuses via Wiser. I don't see any reason why you would not be able to do it. I believe you would be able to Arm/Disarm the house using Group Addresses but I have not set this up, as I suggest clients use the Alarm Keypad or keyfob.

I have only ever interfaced the 2 systems via PRT3/PC Interface

EDIT - The main panel that I use is the EVO192 so you might need to check with your supplier that the panel that you are using is 100% compatible.

 

Yes I use Cbus Group Addresses to trigger Doors controlled by ACM12 Door Controllers. When correctly setup, the Paradox system views the Cbus Group Addresses as "Virtual Inputs"