Concept 4000 and C-Bus via CNI

Does anyone wish to hazzard a guess as to whether the Concept 4000 can integrate smoothly via a 5500CNI ? I don't have any experience with the Concept internet modules and are trying to plan ahead a little for one possible requirement (and CNI already present, no PCI).

Thanks in advance!

 

I can tell you absolutely that it will not.

The Concept uses it's serial interface to talk C-Bus lingo.

You will need a PCI.

Cheers

Rohan

 

Thanks you so much for your reply, PCI now added to install.

 

One more thing, if the Concept panel is running V7.0 firmware it will allow you to set the baud rate for comms with the PCI.

Previously it was set to 1200 which in turn made the PCI useless for anything else.

Cheers

Rohan