configuring wireless units with toolkit software

Discussion in 'C-Bus Wired Hardware' started by Neil C, Jan 15, 2008.

  1. Neil C

    Neil C

    Joined:
    Jun 27, 2007
    Messages:
    46
    Likes Received:
    0
    If you want to use the toolkit software to configure wireless switches and dimmers, how is this done? Is it necessary to connect the PC running the toolkit software into a wired c-bus network, which has a wireless gateway installed?
     
    Neil C, Jan 15, 2008
    #1
  2. Neil C

    NickD Moderator

    Joined:
    Nov 1, 2004
    Messages:
    1,427
    Likes Received:
    64
    Location:
    Adelaide
    Yep.. that's exactly how you'd do it.

    Sadly the Wireless PCI is not available yet.

    Nick
     
    NickD, Jan 15, 2008
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. 06-009-1 Configuring Access Control

  2. Simple explaination of configuring PICED for schedules

  3. Adding wireless units to Toolkit

  4. Dimmer Channels not responding to software & key input units

  5. How is possible to have more than 1 software burden on multiple output units?

  6. Help with configuring my network

  7. Configuring the Wiser Power Meter to work with the new CMU

  8. How to Import old Toolkit cb2 project files into current Toolkit 3 software.

Loading...