Control C-Bus Wireless devices RF remote

Discussion in 'C-Bus Wireless Hardware' started by RobGer, Mar 19, 2006.

  1. RobGer

    RobGer

    Joined:
    Mar 19, 2006
    Messages:
    1
    Likes Received:
    0
    How can I control a C-Bus wireless devices with a universal ir/rf remote?

    I am considering installing a SATURN 2 CH 4 KEY TE DIMMER RF module in my theatre room and it would be nice to control with the same universal remote I use for my theatre system.

    I dont have a wired C-bus system and consider this overkill for my installation and I dont want to use a second remote (clipsal 5888 Series) as hate remote clutter.

    A simple ir to rf repeater utilising the clipsal C-Bus protocol would do the job but may not be available.

    Any ideas on how this can be done (it can be done!) ?


    Feedback appreciated.


    Rob.
     
    RobGer, Mar 19, 2006
    #1
  2. RobGer

    Duncan

    Joined:
    Jul 23, 2004
    Messages:
    925
    Likes Received:
    0
    Location:
    Salinas de Garci Mendoza, Bolivia
    Hi Rob,

    At this point I dont know of any options that wouldn't require at least a small C-Bus Wired Network to act as an IR receiver.
     
    Last edited by a moderator: Mar 19, 2006
    Duncan, Mar 19, 2006
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. IR Control of devices

  2. Programming Wireless devices via a PC - HOW?

  3. Wireless Remote Control for wired buttons

  4. C-Bus devices on different VLAN

  5. C-BUS devices conform to the EMC standards

  6. Can we get the actual feed back from the C-Bus output devices ?

  7. C-Bus Wireless Remote Control of Blinds

Loading...