Control Daikin from C-Bus

Could you please tell which Daikin models are compatible with codes, included in Circa?

None of these yet worked and learning does not work either. Client is very upset. Please help!

Thank you

 

Are you using Circa 2 as these are unlikely to work with Circa 1 (due to the legth of the codes).

To test AC codes always download to the unit and trigger off of cbus. Long codes may not work correctly using the TEST button feature.

 

None of Daikin codes seems to work yet. This is not good as Daikin wanted to promote C-Bus if we had success.

 

try the attached IR Device. Import into your library and then add to project. We have definately had Nirt workign with some Daikin A/C, but I don't have a list of which ones.

 

Richo,

Any chance you might have the hex code in Pronto format for the Daiken unit?

Cheers,

Fleetz

 

No, that file was learnt using our IR Reader unit.

 

I/R Reader unit

Richo,

Sorry if this sounds ignorant but if we use the I/R reader unit to teach it, can cbus blast any I/R code through the emitters?

 

Pretty much. Im still on holidays so don't have the IR Reader specs handy but it supports a wide variety of IR signals. I know there are some less common one not supported, but the majority of IR codes available are supported by the IR Reader and Nirt.

 

CIS guys get holidays?

 

hy richo I want to control the ac daikin ARC433B47 with CBUS but when using IR Reader protocol can not be used ...

there is an error message such as:
"Command is too long for the temp area on IR Transmitter
Length of the command = 1344
Command max length = 511 "

whether there is a solution to the problems I faced