control of solar imputs

Discussion in 'C-Bus Wired Hardware' started by ABSOLUTE, Oct 29, 2007.

  1. ABSOLUTE

    ABSOLUTE

    Joined:
    Aug 10, 2004
    Messages:
    5
    Likes Received:
    0
    Has anyone come up with a way of reconising an amperage output of say a inverter from a solar or wind generator. The purpose of this (pending on load output) would be to then switch loads through Piced Logic to accomadate renewable energy projects.
    Thanks Lance
     
    ABSOLUTE, Oct 29, 2007
    #1
  2. ABSOLUTE

    NickD Moderator

    Joined:
    Nov 1, 2004
    Messages:
    1,427
    Likes Received:
    64
    Location:
    Adelaide
    What's the format of the amperage output? A scaled voltage? 4-20mA? Serial data? The first 2 could be accommodated with a General Input Module, the last coupe be accommodated with a PAC.

    Nick
     
    NickD, Oct 29, 2007
    #2
  3. ABSOLUTE

    znelbok

    Joined:
    Aug 3, 2004
    Messages:
    1,151
    Likes Received:
    17
    A CT with a current transmitter will give you 4-20mA. We use them all the time in our MCC's. You should be able to get 0-10V as well, but a current loop is a better option

    Mick
     
    znelbok, Oct 29, 2007
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. IR Control of devices

  2. CBUSv1 - 4 Channel Dimmers and Ripple Control Tones

  3. HomeGate with 3rd Party IR control?

  4. solar heating control

  5. 24v DC Blind control using shutter control

  6. Touch Screen & Solar DC charge voltage

  7. Adding another CMU for solar

  8. Wiser Power Measurement 'Virtual Channel' config for Dual Solar

Loading...