Control Touchscreen scenes via a Coupler

Discussion in 'C-Bus Wired Hardware' started by Rolecgroup, Apr 14, 2005.

  1. Rolecgroup

    Rolecgroup

    Joined:
    Aug 3, 2004
    Messages:
    69
    Likes Received:
    0
    Is this possible ?

    If so how would we acheive it ? - I sure i read somewhere about using other switches to control NEO scenes, if so can it be done with a touchscreen.



    Thanks



    Dean.
     
    Rolecgroup, Apr 14, 2005
    #1
  2. Rolecgroup

    Newman

    Joined:
    Aug 3, 2004
    Messages:
    2,203
    Likes Received:
    0
    Location:
    Adelaide, South Australia
    Dean

    You do it exactly the same way for a C-Touch as you do for a Neo, i.e. you assign a Trigger Group and Action Selector for the Scene. You then set up the Bus coupler on the Trigger Control Application and set it up to recall the levels that correspond to the Action Selectors on the Control Application.
     
    Newman, Apr 14, 2005
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Bus coupler no scenes!

  2. Bus coupler with scenes

  3. B-Coupler with scenes

  4. Bus Coupler - 2 scenes on one (switch) input

  5. Help! Bus coupler for telescope safety control

  6. 4 scenes from a bus coupler -- what am i missing?

  7. Touchscreen control over Ethernet via CNI's

  8. Scenes BW Touchscreen

Loading...