CTC connection via CNI

Discussion in 'C-Touch/HomeGate/SchedulePlus/PICED Software' started by jboer, Aug 1, 2012.

  1. jboer

    jboer

    Joined:
    Apr 27, 2012
    Messages:
    458
    Likes Received:
    35
    Location:
    Sydney
    Hey Guys,

    I don't have the gear to test it at the moment but does anyone know if I can connect to a CBus network via a CNI with a CTC? I have a job where we have a TCP/IP network but no C-Bus, and if I can use a CNI it would solve a few problems.

    Thanks!

    J
     
    jboer, Aug 1, 2012
    #1
  2. jboer

    Newman

    Joined:
    Aug 3, 2004
    Messages:
    2,203
    Likes Received:
    0
    Location:
    Adelaide, South Australia
    The CTC requires a physical connection to C-Bus.

    If you need to connect to C-Bus remotely (via TCP/IP) then the programs you are looking for are either HomeGate or Schedule Plus. You can run either of these on pretty much any panel PC running Windows and achieve what you want. You would, of course, need a CNI on the C-bus network to enable HomeGate/Schedule Plus to connect to the C-Bus network.
     
    Newman, Aug 2, 2012
    #2
  3. jboer

    jboer

    Joined:
    Apr 27, 2012
    Messages:
    458
    Likes Received:
    35
    Location:
    Sydney
    Mm ok I was afraid of that. Thanks for the reply though!
     
    jboer, Aug 3, 2012
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. CNI Lantronix No connection with device

  2. Connection via CNI using windows module

  3. CNI connection problem

  4. CNI, problem with connection

  5. CTC and remote connection via wiser

  6. C-Touch connection through CNI

  7. CNI connection issues - "connection already in use"

  8. CNI Connection Unstable

Loading...