CTouch-CA addresses and action selectors?

Discussion in 'C-Touch/HomeGate/SchedulePlus/PICED Software' started by ltlbigchief, Aug 3, 2005.

  1. ltlbigchief

    ltlbigchief

    Joined:
    Jul 24, 2005
    Messages:
    32
    Likes Received:
    0
    Location:
    Gold Coast, Queensland, Australia
    Ok, i have set several CA addresses, with many of them having at least 4 action selectors. So for example if Action Selector 1 is at level 1, AS 2 is at level 2, AS 3 is at level 3 and AS4 at 4.

    Question: if I Trigger the CA address to say AS4 level, then later on trigger it with the AS1 level (tag), the scenes that have the triggers AS2 and AS3 are they triggered as cbus changes levels. Does Cbus set the CA address instantly to the trigger level or does it ramp (even when time is set to 0) to the required level?

    If you need a more detailed explanation of what is happening or what I am trying to do ... just let me know.

    Thanks in advance.
    Ltlbigchief.
     
    ltlbigchief, Aug 3, 2005
    #1
  2. ltlbigchief

    Newman

    Joined:
    Aug 3, 2004
    Messages:
    2,203
    Likes Received:
    0
    Location:
    Adelaide, South Australia
    It goes straight to the new level, intermediate action selectors will not be triggered.
     
    Newman, Aug 3, 2005
    #2
  3. ltlbigchief

    ashleigh Moderator

    Joined:
    Aug 4, 2004
    Messages:
    2,397
    Likes Received:
    26
    Location:
    Adelaide, South Australia
    ashleigh, Aug 4, 2005
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Application HEX addresses and dimensions.

  2. DLT Action Selectors

  3. Triggering action selectors?

  4. Action Selectors

  5. Trigger Scenes using action selectors

  6. Trigger Groups and Action Selectors

  7. Reset Wiser IP addresses and router config

Loading...