Dimming two circuits from one key?

Have a 5085DL DLT that I want to control two dimmer channels here is the basic set up

Key 1 controlling Channel 1 on the dimmer (set to dimmer)
Key 2 controlling Channel 2 on the dimmer (set to dimmer)

Key 3 I want to be able to dim Channel 1 and 2. If channel 1 and or 2 are set in the dim mode I would like a key press to Key three to then dim both channel up or down.

If Channel 1 and 2 are both off then Key 3 would dim up to 100% next press dim down to 0%.

I have been able to get Key 3 to dim Channel 1 and 2 together using channel logic on the dimmer however soon as either channels are dimmed they aren't controlled by key 3.

Sure I have missed something obvious.....hence asking the experts!

Cheers,

Fleetz

 

Try the blocks tab on the dlt and select button three the act on the two groups you want to dim. This will show "Multiple" in the Key Group and then set the function to dimmer.

Mick

 

Viola!.....Thanks Mick