Disk Boot Failure, Insert System Disk and Press Enter

Discussion in 'C-Touch/HomeGate/SchedulePlus/PICED Software' started by powerhouse, Jun 25, 2010.

  1. powerhouse

    powerhouse

    Joined:
    Sep 3, 2009
    Messages:
    2
    Likes Received:
    0
    Location:
    Canberra, ACT
    I have a client with a Colour Touch Screen and it's been installed 10 months or so ago, I programmed it all up as per the training manual and my course. However they have called me back to site as they have the message, "Disk Boot Failure, Insert System Disk and Press Enter". I've contacted CIS Tech Support and they posted me another Flash Card, however that hasn't fixed the problem either. I have had no issues with any other touch screens and have never seen this before. Because by installing the new Flash CIS provided I thought that would reload the boot files etc. in the event they had become corrupt.


    Any Ideas??

    Cheers,

    Richard
     
    powerhouse, Jun 25, 2010
    #1
  2. powerhouse

    Darren Senior Member

    Joined:
    Jul 29, 2004
    Messages:
    2,361
    Likes Received:
    0
    Location:
    Adelaide, South Australia
    It sounds to me like some sort of hardware failure. You will probably need to get the unit swapped over.
     
    Darren, Jun 25, 2010
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Power Failure And DLTs

  2. C-touch Reading text files from disk.

  3. Color Touch Screen Boot up Problem

  4. Cbus System Failure

  5. eDLT and Short Press Toggle with Long Press Start Timer

  6. first press to wake the system up?

  7. CBUS system after power failure

  8. Door bell press and door bells?

Loading...