DLT Contrast

Discussion in 'C-Bus Wired Hardware' started by jboer, Sep 18, 2012.

  1. jboer

    jboer

    Joined:
    Apr 27, 2012
    Messages:
    458
    Likes Received:
    35
    Location:
    Sydney
    I have a new DLT unit (About 2 hours old) that after a restart the contrast on the screen has gone fully dark. I can see the display when held at a very flat angle but it is unreadable when it is vertical. Is there a way to change the contrast or is it a faulty unit?

    Thanks!
     
    jboer, Sep 18, 2012
    #1
  2. jboer

    Newman

    Joined:
    Aug 3, 2004
    Messages:
    2,203
    Likes Received:
    0
    Location:
    Adelaide, South Australia
    If the fault occurred after a re-start, have you tried re-starting the unit again to see if it sorts itself out?

    The contrast is not adjustable, so if the restart doesn't fix it then it might need to be replaced under warranty.
     
    Newman, Sep 18, 2012
    #2
  3. jboer

    jboer

    Joined:
    Apr 27, 2012
    Messages:
    458
    Likes Received:
    35
    Location:
    Sydney
    Yes tried a couple, the sad thing is that the screen fully died after 2nd restart.
    The unit seems to work fine in all other functions and can been seen and configured by toolkit, but just no screen. So yes a warranty call I think.
     
    jboer, Sep 19, 2012
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. DLT tutorial anyone?

  2. Documentation for the Label commands used in DLT

  3. LCD DLT Saturn series question

  4. DLT labels

  5. DLT Programming Problems

  6. Updating of DLT Text in DLT Switch?s

  7. DLT controlling volume from one button (was: DLT And Infra Red Codes)

  8. E-DLT - White for old DLT Glass?

Loading...