Duplicate Trigger Control responses.

Discussion in 'C-Touch/HomeGate/SchedulePlus/PICED Software' started by Ingo, Jun 12, 2011.

  1. Ingo

    Ingo

    Joined:
    Dec 2, 2006
    Messages:
    290
    Likes Received:
    1
    Location:
    South Africa
    Hi,

    Sometimes I run both my PAC and PICED at the same time while designing new scenes etc. With PICED I have my Logic and Schedules disabled but it's still connected to the network for testing.

    The problem I have is that even in this mode PICED still responds to a Trigger-Control command. What this does is that my PAC and PICED responds to the same request and I see duplicates responses.

    Can we not have another option to disable the Trigger-Control application in PICED the same as Logic and Schedules? This will prevent the duplicate responses while working on the system.

    Thanks,
    Ingo
     
    Ingo, Jun 12, 2011
    #1
  2. Ingo

    Darren Senior Member

    Joined:
    Jul 29, 2004
    Messages:
    2,361
    Likes Received:
    0
    Location:
    Adelaide, South Australia
    I have added this to our issue tracking system (#21523).
     
    Darren, Jun 14, 2011
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Updated documentation: Trigger Control Application

  2. Neo, Support of one application PLUS Trigger Control

  3. Unable to apply labels for Trigger Control on DLT

  4. Applications and Trigger Control

  5. SC5000CT responses slowly.

  6. Scene Trigger Control

  7. Wiser has duplicate IP

  8. Trigger control scene help

Loading...