eDLT Blocks

Discussion in 'General Discussion' started by Stephen Scott, Oct 26, 2016.

  1. Stephen Scott

    Stephen Scott

    Joined:
    Apr 18, 2014
    Messages:
    17
    Likes Received:
    0
    Location:
    Melbourne
    I am trying to switch multiple channels with one key on an eDLT but
    5 Gang eDLT switches don't appear to have a blocks page as per other cBus switches
    Is there a simple way without setting up a scene because then you need separate ON and OFF keys.
    The channels are also controlled by switches in other locations.
     
    Stephen Scott, Oct 26, 2016
    #1
  2. Stephen Scott

    NickD Moderator

    Joined:
    Nov 1, 2004
    Messages:
    1,427
    Likes Received:
    64
    Location:
    Adelaide
    The eDLT doesn't have blocks, it's more like the CTouch than other keys units.

    With the eDLT you can however toggle a scene on and off, so a scene keys sounds like it might do what you want.

    With a Scene Toggle key the right key sets the scene and the left key turns all groups that were ON in the scene OFF (as long as the scene is set... if something else has turned one of the scene groups off then the scene is considered broken and the left hand key will not affect the remaining groups).

    I haven't tried it but you may also be able to set up a scene cycle key to do what you want.

    Nick
     
    NickD, Oct 27, 2016
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Timer function with multiple blocks problem

  2. Toolkit 1.5 Issue Keys/Blocks (Wired only)

  3. blocks

  4. toggle/dimming function for multiple blocks

  5. New EDLT Launch event

  6. eDLT - which unicode encoding?

  7. EDLT Release Date

  8. Should I use Logic or blocks?

Loading...