EDLT to 50% then dim off 1 button

Discussion in 'C-Bus Wired Hardware' started by Mike Costello, Sep 18, 2017.

  1. Mike Costello

    Mike Costello

    Joined:
    Dec 9, 2013
    Messages:
    47
    Likes Received:
    0
    Location:
    UK
    Hi,

    I've a client who wants his downlighters to always come on to 50% but then to be able to dim it up and down from an EDLT.

    I can do it with 1 button turning it onto 50% then another button to dim but can it all be done from 1?

    Thanks
     
    Mike Costello, Sep 18, 2017
    #1
  2. Mike Costello

    NickD Moderator

    Joined:
    Nov 1, 2004
    Messages:
    1,427
    Likes Received:
    64
    Location:
    Adelaide
    You should be able to use a scene widget to do this.

    Make a scene (in the eDLT) with the one (or more) group(s) in it which sets them to 50%.

    Select the Off & Ramp Down/On and Ramp Up key function.

    The Right button with set the scene (ie turn it on at 50%) with a short press and then dim up with a long press. The left key will turn the group(s) off with a short press and dim down with a long press.

    Nick
     
    NickD, Sep 19, 2017
    #2
  3. Mike Costello

    Mike Costello

    Joined:
    Dec 9, 2013
    Messages:
    47
    Likes Received:
    0
    Location:
    UK
    That's great thank you. The only thing it doesn't then do is have the percentage showing on the EDLT. Is that possible?
     
    Mike Costello, Sep 19, 2017
    #3
  4. Mike Costello

    NickD Moderator

    Joined:
    Nov 1, 2004
    Messages:
    1,427
    Likes Received:
    64
    Location:
    Adelaide
    No.

    The scene widget doesn't currently offer level as a status indication (generally the concept of the level of a scene doesn't really make sense).

    Nick
     
    NickD, Sep 21, 2017
    #4
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. PICED won't compile empty IF / THEN / ELSE

  2. How to use a single button to toggle and dim?

  3. How to use a single button to toggle and dim?

  4. Dim multiple lights from a single button

  5. Disable PIR and switch with scene, then enable again with all off

  6. eDLT button LED control via logic

  7. eDLT button delamination

  8. EDLT 1 button bell press with 2 groups

Loading...