I am programming a project. There is something wrong I can't understand. Please help me. There are 3 networks, each has >10 Relays, 1 C-Touch(BW), 1 PC Interface and 1 Schedule Plus(3.7 updated from 3.0),all stand alone. In C-Touch ande Schedule, scenes' ramp rate is 2 minute, using relays' 'turn on' option lamps with turn on one by one. When cotrolled by C-Touch, everything is OK. When Schedule Plus is online, the scenes executed correctly. But in the end C-Gate returned reports like this: # lighting syncupdate //wangqiu/100/56/51 level=115 #sourceunit=-1 OID=... ... Then loads will turn to the levels according to the reports. This often occurs on different units, different Group Addresses and resluts in different light levels. On/off control with Schedule Plus is OK. All of the 3 networks are all the same situation. Any one can tell me what happened? Thanks a lot!
