Feedback from far side network to Wiser

Discussion in 'C-Bus Wiser 1 Controller' started by Keltt, Nov 30, 2012.

  1. Keltt

    Keltt

    Joined:
    Jan 16, 2011
    Messages:
    3
    Likes Received:
    0
    Location:
    Moscow
    Hi!!!

    After reboot the Wiser I don't have feedback from far side network. I need to switch all groups to On (on far side network) and after that everything is working fine.

    I have one bridge and two networks.
     
    Keltt, Nov 30, 2012
    #1
  2. Keltt

    bmerrick

    Joined:
    Jun 13, 2007
    Messages:
    437
    Likes Received:
    35
    Location:
    Sydney
    Hi Keltt,

    Just check the Network Bridge under Toolkit has 'both sides' set to 'Send to Adjacent' or the change broadcasts won't get forwarded.

    Otherwise a further Wiser reboot may do the trick, but be aware of any Power Monitoring data that might be lost (if 5504CMU monitored) and backup if required.

    Kind Regards,

    Brad
     
    bmerrick, Dec 13, 2012
    #2
  3. Keltt

    Keltt

    Joined:
    Jan 16, 2011
    Messages:
    3
    Likes Received:
    0
    Location:
    Moscow
    Hi, Brad!

    I check, 'both sides' are set to 'Send to Adjacent Network'...
    The problem is still present.

    Best Regards!!!
     
    Keltt, Jan 17, 2013
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Load side protection

  2. C-Bus Controlled Toilet Flusher (Has it gone to far)

  3. How far Touch Screen can control?

  4. Feedback from Wiser-Cbus-Wiser

  5. Feedback Commands From Ramp To Level

  6. Feedback from SENCT4

  7. Extended MMI messages from the far side.

  8. no one can solve this problem so far

Loading...