Firmware issue

Discussion in 'C-Bus Wired Hardware' started by ranilroshan, Nov 11, 2009.

  1. ranilroshan

    ranilroshan

    Joined:
    Feb 11, 2006
    Messages:
    79
    Likes Received:
    0
    Location:
    Sri Lanka
    Today I found that there were some issue in the firmware of 2K NEO switches (All the 7 units) which we ordered for one of our project. All these 2Key switches were identified as 8Key switches in toolkit software. Anyone knows how to correct this issue, because I need to hand over this site within next couple of weeks.

    Rgd

    Ranil Roshan
     
    ranilroshan, Nov 11, 2009
    #1
  2. ranilroshan

    ashleigh Moderator

    Joined:
    Aug 4, 2004
    Messages:
    2,397
    Likes Received:
    26
    Location:
    Adelaide, South Australia
    They have been set up incorrectly in the factory.
    You need to return them for credit and exchange.
    There is nothing you can do to change the setting in the unit.
     
    ashleigh, Nov 11, 2009
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Is C-Touch getting a firmware upgrade

  2. SENPIRSS Question (Firmware 1.2.67)

  3. C-Touch firmware update crash

  4. C-Touch Firmware Update? Version 2 C-Touch

  5. Firmware issue (PICED 4.4.0)

  6. PAC firmware issue

  7. B&W CTouch Firmware Issue? (3.8)

Loading...