Format command on the Wiser

Discussion in 'C-Bus Wiser 2 Controller' started by MHeaton, Jul 10, 2015.

  1. MHeaton

    MHeaton

    Joined:
    Apr 22, 2008
    Messages:
    106
    Likes Received:
    2
    Location:
    London
    Hi there,
    The wiser doesn't appear to honour the width and precision format modifiers on the format command (e.g. myVariable:2:4).
    I ran some code in the dev environment and it works - and yet run it in the wiser and I got a string ending .000

    Regards
    Mark
     
    MHeaton, Jul 10, 2015
    #1
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Article Discussion XSLT Script for Groups (Addresses in HEX format)

  2. 06-008-1 Commands for the C-Gate Command Interface

  3. Supporting .GIF format

  4. PICED Paint Format - Suggested small change pls

  5. Upon telnetting to C-Gate, the 1st command issued always receives 400 SYNTAX ERROR

  6. iRule or Command Fusion control with Wiser

  7. Configuring the Wiser Power Meter to work with the new CMU

  8. The USB Port at the front of the MRA Matrix Switch

Loading...