Help using 5500CN

Discussion in 'C-Bus Toolkit and C-Gate Software' started by Tonyo, May 20, 2005.

  1. Tonyo

    Tonyo

    Joined:
    Aug 4, 2004
    Messages:
    48
    Likes Received:
    0
    Location:
    Canberra
    I have just installed a 5500CN network interface. It appears in the c-bus network with unique ID 253. I have set an IP address of 192.168.0.253 which I can ping from my PC. When I run diagnotics I get "Asynchronous socket error 10061" followed by "CNI not found at 192.168.0.253" when I answer OK. C-Gate console serve does not work either. Can anyone shed light on my problem please
    Tony
     
    Tonyo, May 20, 2005
    #1
  2. Tonyo

    PSC

    Joined:
    Aug 3, 2004
    Messages:
    626
    Likes Received:
    0
    Location:
    Brisbane, Australia
    First thing - Have you configured your port number on your CNI?

    Second thing - Have configured your port number in your CBus diag software to 14000?
     
    PSC, May 20, 2005
    #2
  3. Tonyo

    Tonyo

    Joined:
    Aug 4, 2004
    Messages:
    48
    Likes Received:
    0
    Location:
    Canberra
    Reboot fixed my problem.

    I rebooted my machine and then everything seemed to work. I am still interested in what I did to lock myself out of the c-bus.
    Tony
     
    Tonyo, May 20, 2005
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Can not add the CNI 5500CN by catalogue number.

  2. Connection of 5500CN and Wireless gateway

  3. C-Bus Network Interface 5500CN

  4. problem with new 5500CN and Toolkit 1.2.2

  5. Location of network interface (5500CN)

  6. Linux connection to 5500CN

  7. Help connecting to 5500CN please

  8. Using Using a Shutter Control Relay as a Change over Relay

Loading...