Help with clipsal installation!

Is there anybody that can help me with the installation?
I have 3 Clipsal dimmers 1A and 1 12x10A relay. 10x8Gang Neo switches and a touch monochrome panel. What i would like to know is what is some technical details regarding how to connect the dimmers and the relay as is the first time that i am involve with c-bus. Do i have to connect an MCB before each dimmer or at the output of each channel an RCD to prodect the dimmers. Please if anybody can give some instructions i will apreciate it.
Thanks in advance.

 

Couple of quick questions that are fairly important to giving you accurate answers.
Firstly, What country do you come from?
Secondly, are you a licensed electrician?

Darpa

 

hi

thanks for your answer.

I am not an electrician but an electronics engineer. I will do the project with a licence electrician. he will install the panels and i will do the programming. I am from Cyprus

 

Dear Dj,
your supplier should be responsible to give you all needed details.
Anyway, on http://www2.clipsal.com/cis/technical/product_groups/cbus/output_units you can find installation instructions for every unit to help your electrician.
If you have any specific question don't hesitate to email me.