How does PAC handle Modules

Discussion in 'C-Touch/HomeGate/SchedulePlus/PICED Software' started by Josh, Jul 1, 2005.

  1. Josh

    Josh

    Joined:
    Aug 25, 2004
    Messages:
    241
    Likes Received:
    0
    Location:
    Pretoria, South Africa
    I have a question regarding the PAC.

    If you a module that run once a group address is for example on, and within the logic you have a 10 minutes delay. What happens if while the delay logic is executed, the group address state changes to off, and then on again. Does the unit run another instance of the module again, or will the module be executed twice? :eek:
     
    Josh, Jul 1, 2005
    #1
  2. Josh

    Darren Senior Member

    Joined:
    Jul 29, 2004
    Messages:
    2,361
    Likes Received:
    0
    Location:
    Adelaide, South Australia
    Neither of your suggestions is correct. While the delay is in progress, the module doesn't do anything. When the delay is complete, the code continues from the next line of code.

    See the Delay Procedure topic in the logic help file.
     
    Darren, Jul 1, 2005
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. How does it all work

  2. How does CBUS like unconnected segments.

  3. How often does Shedule Plus read from the C.Bus network

  4. DLT Text - How to handle Unused Buttons?

  5. <SCENE MODIFY> how does it work exactly?!?!

  6. Can CBus handle HVAC?

  7. Ness M1 unable to handle CBUS traffic

  8. How does a 5000CT flash ram break ?

Loading...