how to assign an off trigger scene

Discussion in 'General Discussion' started by ADL, Jul 4, 2007.

  1. ADL

    ADL

    Joined:
    May 31, 2007
    Messages:
    18
    Likes Received:
    0
    i need to assign an of triggerscene to a outdoor sensor any hint will be helpful!!
     
    ADL, Jul 4, 2007
    #1
  2. ADL

    paulw11

    Joined:
    Dec 4, 2006
    Messages:
    97
    Likes Received:
    0
    Location:
    Blue Mountains, NSW, Australia
    Scene Trigger

    Hi,

    When you set up scenes on a scene capable device (Neo, Saturn etc) you assign a trigger group and an action selector. The trigger group is like the group address for a standard switch/output, except it is in a different application. The action selector is effectively the "level" that is sent to the trigger group. An "ON" event is a set level 255 and an "OFF" event is a set level 0, so what you need to do is create two scenes.
    For your "on" scene assign action selector 255 and for your "off" scene assign action selector 0. Now on your movement sensor you can trigger the two scenes by sending "ON" (When movement detected for example) and "OFF" (When timer expires).

    This thread has some more information
    Paul
     
    paulw11, Jul 4, 2007
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. C-Touch Scene trigger from remote Network

  2. How to toggle a Scene ON/OFF with 1 button ?

  3. How do I trigger a scene in a wireless Wall plug from wired key button?

  4. How to trigger scene in Touchscreen with PIR ?

  5. Can a Neo 8 gang-key input unit trigger scene stored on a SENPILL?

  6. How to make a scene toggle on/off?

  7. Using Off function for a scene trigger GA

  8. Assign Serial RS232 Logic to a CTouch Software Button?

Loading...